DA-2006-VL, works in conjunction with DA-2006 Series Defibrillator Analyzers, providing Variable Loads used when testing Defibrillators to assure the proper electrical current is delivered to the heart, per IEC 60601-2-4 and AAMI DF80 standards. Automatic detection of loads, no settings to change or configure in the DA-2006/P. Ensure that the correct load is selected in the Defibrillator output pulse measurement.

If you already own a DA-2006 or DA-2006P, you can update your software for free to be compatible with the DA-2006-VL.

NOTE: This instrument is intended for use by trained service technicians.
Features:

• Pulsed Biphasic, Biphasic and Monophasic Compatible
• Fully AED Compatible
• 5000 V, 1000 Joule Capacity
• Smart Loads, no settings to change in DA-2006 or DA-2006P
• 25-200 ohm Loads, 25 ohm Steps

The post Defibrillator Analyzer Load DA 2006 VL appeared first on Pelita Biomedical (PBM).

• First Pressure Range 100 PSI
• Second Pressure Range 10 PSI
• No Temperature Output
• High Frequency Output
• Min/Max and RS232 Add

Please note, this product has preset ranges and outputs; no changes can be made to this model. If you need different ranges and/or options, please select the DPM-2201 Model and adjust according to your requirements.

The post Pressure meter Eye Surgery Equip DPM-220210010NHF appeared first on Pelita Biomedical (PBM).

• True RMS readings using patent pending DFA® technology
• Industry standard current sensing technology
• mV, mV peak, crest factor and power (wattage) ranges
• RF current (mA) and power (watts) can be displayed
• Internal precision load resistor network: 50 ohms to 750 ohms in 50 ohm increments External load resistor capability – uses the external resistor value as a discrete value or add it to any internal load resistor value
• 2.5% of reading accuracy on RF current (mA)
• 5% of reading accuracy on RF power (watts)
• Internal load resistor network is cooled with temperature and power controlled cooling fan
• Uses an internal 0.1:1 ratio precision RF current transformer
• Independent CQM (REM/ARM) resistor network: 1 ohm to 500 ohms in 1 ohm increments
• RF leakage measurements through 200 W test load
• Internal rechargeable battery allows operation independent of line power
• Large graphics display with cursor selection of options and setup of parameters
• Digital data output via USB
• Remote capabilities using RS-232 and USB
• PC based interface program optional
• Digital calibration – no pots to turn
• Selectable display options
• Tactile keys with audio feedback

The post Electrosurgery Analyzer ESU 2300 appeared first on Pelita Biomedical (PBM).

The SPO-2000 gives a calibrated pulse rate for 30, 60, 90, 120, 150 and 180 BPM pulse rates.

Each pulse rate has a unique LED indicator. The SPO-2000 is designed to work in conjunction with the FingerSim manufactured by BC Biomedical and available from BC Group International. The FingerSim is used to verify the operation of pulse oximeters. The SPO-2000 adds calibrated pulse rates to the functionality of the FingerSims. (FingerSim Required, but NOT included).

NOTE: The accuracy of the saturation percentage on the pulse oximeter being tested is a function of the FingerSim – not the SPO-2000. The SPO-2000 only controls the pulse rate. See the user information included with the FingerSim for accuracy and related data.

The post SPO2 Analyzer Finger Sims-SPO-2000 appeared first on Pelita Biomedical (PBM).

The post Infusion Flow Module Blank IPA 3900-MB appeared first on Pelita Biomedical (PBM).

The interchangeable modules provide the user with unprecedented flexibility in their IPA Testing System. There is no need to be down when the unit is due for calibration. Only the modules need to be calibrated. This also allows the rotating of modules or the use of a spare module, thus providing flexibility not available in other systems. The same is true for service. If there is a problem on one channel, only the module needs to be serviced, eliminating downtime.

The IPA-3400 display may be raised to gain full access to the four user swappable flow modules. No wiring or plumbing is required for module installation. Simply lift the display, remove the cover plate, loosen the retainer screw and slide the module out. All plumbing and electronics are self-contained and all electrical connections are made via a slide-in mating connector on the end of the module. Then just reverse the process for installation.
The IPA-3400 allows for easy field expansion. You can buy a 1 channel unit and later purchase additional modules that can be added in the field. Just plug them in and the system will automatically recognize the additional module(s), reconfigure itself and you are ready to go.

The post Infusion Flow Flow Module IPA 3900-FM appeared first on Pelita Biomedical (PBM).

The post Anesthesi Flow Analyzer Vac (IMT PF302) PFC 3000M-MGA-KIT appeared first on Pelita Biomedical (PBM).

The post Anesthesi Flow Analyzer Low (IMT PF301) PFC 3000L-MGA-KIT appeared first on Pelita Biomedical (PBM).

The post Anesthesi Flow Analyzer (IMT PF300) PFC-3000A-MGA-KIT appeared first on Pelita Biomedical (PBM).

The unit’s flexible design and portable size makes it the ideal service tool for anesthesia service applications in hospitals and surgical centers. It has a slanted display and adjustable handle/stand to allow for ease of viewing. The internal rechargeable Lithium battery provides for hours of continuous operation.

One button selection of the agent to be analyzed coupled with one button control over the sampling pump make the unit simple and quick to use. No complex menus and key combinations are required. The internal data logger combined with the internal clock allows for the storage of up to 250 time and date stamped readings, that can be downloaded to a computer using the USB interface.

Flash Memory and the USB interface allow for field upgrades with downloads from our website.

Features

• State-of-the-art NDIR (Non-Dispersive Infrared) Technology
• Measures 4 Anesthetic Agent Gases: Sevoflurane, Isoflurane, Desflurane and Halothane
• Small, Portable unit with adjustable Handle/Stand
• Large Graphical Display with Backlight
• User Friendly Interface: One Button Agent Select One Button Sample (Pump) Control
• Auto compensation for Temperature and Barometric Pressure
• Built in Sampling Pump
• Gas Flow Sampling at 150 ml/min
• Manual and Automatic operation
• Internal Data Logging with Date and Time – 500 Samples
• Rechargeable Battery
• USB Computer Interface
• Field Upgradeable – Flash Memory
• Fast warmup time
• Comes with NIST Traceable Calibration Certificate with Data (12 Points)
• Service Tool for anesthesia service application (NOT FOR CLINICAL USE)
• Made in USA

Anesthetic Agent Testing using the BC Biomedical AA-8000

The post Anesthesi Agent Analyzer AA-8000 appeared first on Pelita Biomedical (PBM).